+ All documents
Home > Documents > Untitled - Wilson Tool

Untitled - Wilson Tool

Date post: 04-May-2023
Category:
Upload: khangminh22
View: 1 times
Download: 0 times
Share this document with a friend
28
Transcript

2

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

ORDER Minimum order is $50.00

CREDIT REQUIREMENTS All orders are subject to approval by our Credit Department. If you are a new account, please furnish us with your tax exempt status, a bank reference, three current supplier references and/or your current D&B rating with your first order. A credit limit will be imposed on new accounts until credit has been established.

PAYMENT TERMS Terms are net 10 days. Catalog prices are subject to change without notice.

FREIGHT Orders are shipped F.O.B. from our manufacturing facility.(International Shipments are Incoterms: Ex Works).

ORDER CANCELLATION In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and material.

RETURNED MATERIAL A handling/restocking fee will be applied to all standard products returned for credit. A return authorization number and shipping instructions must be obtained in advance before an item can be returned.

CLAIMS All claims or product shortages must be made within 30 days of the invoice date.

Terms and Conditions

wilsontool.com is your

online source for the latest

news and information from

Wilson Tool. Available in

seven languages,

wilsontool.com is a great

resource for all of our

customers around the globe.

Our e-newsletters not only keep you up to date on the

latest product and company news along with workshop

and class information, but each month we provide a

solutions-based article to improve performance and

productivity in your shop.

Register at wilsontool.com

3

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Table of Contents

Hand Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Measurement Tools. . . . . . . . . . . . . . . . . . . . . . . . . . 5Magnetic Squaring Arm . . . . . . . . . . . . . . . . . . . . . . 5Tooling Accessories • Alignment Tools . . . . . . . . . . . . . . . . . . . . . . . . 6-7

• Ball Riding Die . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

• Brush Die . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

• Trumpf Cartridge / Die Plate . . . . . . . . . . . . . . . .9

• Trumpf Die & Stripper Adapters. Shims . . . . . . . .10

• Trumpf Alignment Collars . . . . . . . . . . . . . . . . . .11

• Punch Chucks . . . . . . . . . . . . . . . . . . . . . . . . . .11

• Thick Die & Punch Shims, Slug Ejectors . . . . . . . .12

• Thin Die & Punch Shims, Slug Ejectors . . . . . . . .13

Machine Accessories • Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

FAB Square Shearproof. . . . . . . . . . . . . . . . . . . . . . 15Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Grinding Fixture & Components . . . . . . . . . . . . . . . . .17

Work Stopper Assemblies . . . . . . . . . . . . . . . . . . .18-19

Stamping Retainer Accessories. . . . . . . . . . . . . .20-21

Urethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Tool Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Tool Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25

e-Business Center

Request a quote. Place an order. Review your account

history. Track a shipment. Even download special tool

drawings to easily program your machines. 24 hours a

day, 7 days a week.

Log-on or register your account at wilsontool.com/ebiz.

YouTube

Wilson Tool’s YouTube channel contains many videos

featuring product demonstrations showing our tooling in

action. Visit us at

http://www.youtube.com/user/wilsontooltube

4

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

HAND TOOLS

Spanner WrenchCAT. NO. 6058

Tru-Arc (Ring Clip) PliersCAT. NO. 6056

SAE Hex Key Wrench SetCAT. NO. 6057

Soft Face HammerCAT. NO. 6106

T-Handle extractor forlarge station guide

assembliesCAT. NO. 6483

Oil StoneCAT. NO. 6060

Metric Hex Key Wrench SetCAT. NO. 6105

Diamond FileCAT. NO. 6059

TOOL KIT CAT. NO 6091(1) Tool Box, (1) Oil Stone, (1) Diamond File, (1) Tru-Arc Pliers, (1) Spanner Wrench, (1) Punch Lubricant, (1) Soft Face Hammer, (1) Metric Hex Key Wrench Set, (1) Hex Key Wrench Set (English), (1) Assortment of 4-sizes of

square urethane ejectors.

150 lb On/Off MagnetCAT. NO. 974150

EXP Punch Removal KeyCAT. NO. 6989

5

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

DIGITAL THICKNESS GAUGE 974117

• Compact size with spring loaded jaw mechanism• Accuracy to 0.002”• Readings in millimeters, inches and fractions• Scissor action is much faster to use than a micrometer

DIGITAL EZ READ CALIPER 974118

• Large digital readout [0.875” x 2.375”]• Measuring range 0 - 6”• Accuracy to 0.001”

DIGITAL ANGLE CUBE 974119

• Compact Size• Real time display of angle comparison• Magnets on three sides for attachment flexibility• Self rotating display for 180° readings

MEASUREMENT TOOLS, MAGNETIC SQUARING ARM

DIGITAL PROTRACTOR SET 980065

• Set includes one of each : 4”, 8” and 12” • Light weight, easy to use and durable

42750

42750A

DESCRIPTION CAT. NO.

Magnetic Squaring Arm Left 42750L

Magnetic Squaring Arm Right 42750R

30° Die Adapter 42750ANote: Not intended for use with American style arrow dies

MAGNETIC SQUARING ARM

6

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

ALIGNMENT TOOLS

• The fixture can take all types of Trumpf-style collars: Size I, Size II, Minimatic-style, Heavy Duty, Manual, plus forming tools that do not have integral collars. Can be used for flat and whisper-style punches.

• Suitable for Trumpf, Pullmax, Omes, Euromac, Kunz and Boschert machines.

TRUMPF ALIGNMENT FIXTURE

DESCRIPTION CAT. NO.

Alignment Fixture 24186

STRIPPIT STYLE 3-1/2” ASSEMBLY FIXTURE

DESCRIPTION CAT. NO.

Alignment Fixture 24161

• Bench mounted aid for assembling and maintaining 3-1/2” Strippit® style guide assemblies.

7

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

ALIGNMENT TOOLS

To align A and B stations, you will need either one or two tools for each size station, depending on the type of machine. • For a single track turret, one tool is required to align each station. • For a multiple track machine, two tools are required to align each station (one in the front of the station and one in the back).

TOOLS FOR AMADASingle Track Machines

StationUPPER UNIT LOWER UNIT

CAT. NO. CAT. NO.

1/2” [A] 2597 2598

1-1/4” [B] 2599 495

TOOLS FOR AMADAMultiple Track Machines

StationUPPER UNIT

CAT. NO.

1/2” [A] 2601 *

1-1/4” [B] 2602 *

*NOTE: Two of each Cat. No. required.

ALIGNMENT TOOLS

StationUPPER UNIT LOWER UNIT

CAT. NO. CAT. NO.

2” [C] 1840 1841

3-1/2” [D] 1947 1948

4-1/2” [E] 1949 1950

6” [F] 2290 2291

THIN TURRET ALIGNING TOOLS

DESCRIPTION CAT. NO.

1-1/4” STATION

Upper Unit 494

Lower Unit 495

2” STATION

Upepr Unit S190

Lower Unit 1841

3-1/2” STATION

Upper Unit 496

Lower Unit 497

8

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

The “Ball Riding Die,” consists of a spring loaded ball designed to help eliminate several of the following problems:

• Sheet hang-up from the material running into a higher die, such as a forming tool.

• Sheet deformation from punching next to dies of different heights.

• Damage to forming die inserts when the die cap receives uneven loading during punching in neighboring stations.

To reduce sheet and tool damage in forming applications, two of these dies are placed in stations surrounding the forming tool. When the sheet approaches the form-up die, it is lifted by the ball riding die. When the forming operation begins, the ball in the surrounding die recesses with the sheet. Once the form has been achieved and the tool strips, the spring loaded balls lift the sheet back to its original height. This allows the sheet to move more freely through the turret, avoiding collisions with the form-up tool.

Placing these dies into the vacant stations on a turret loaded on one side can also eliminate material crashes.

BALL RIDING AND BRUSH DIE

Brush dies are primarily used in applications where any marking that might be caused by ball riding dies is not acceptable.

BALL RIDING DIE

Station CAT. NO.

1/2” [A] 2375

1-1/4” [B] 482

2” [C] 13591

3-1/2” [D] 13592

4-1/2” [E] 13593

BRUSH DIE

Station CAT. NO.

1/2” [A] 2760

1-1/4” [B] 2761

2” [C] 2762

3-1/2” [D] 2763

4-1/2” [E] 2764

9

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

TRUMPF CARTRIDGE / DIE PLATES

FEATURES AND BENEFITS

• Designed to enhance punch press productivity

• Lightweight, durable alternative to plastic or steel cartridges

• Constructed of 6061 T6 aluminum

TRUMPF CARTRIDGE & DIE PLATE

Description CAT. NO.

Trumpf Cartridge 26838US

Cartridge Magnetic Pad 26235

Cartridge Magnetic Pad (5 pack) 26259

Trumpf GL Die Plate Assembly 26731

Trumpf GL Die Plate Key Assembly only 26730

Trumpf GL Die Plate Key Ball Plunger only 980172

10

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

1 2

3 4

Screw (M8 x 12mm)Cat. No. 970398 $3.25

Dowel Pin (M8 x 12mm)Cat. No. 6717 $2.75

TRUMPF DIE & STRIPPER ADAPTERS, DIE SHIMS

DIE AND STRIPPER ADAPTERS, DIE SHIMS

SIZE DESCRIPTION CAT. NO.

I to II 1. Die Adapter, machine groups F/H/I 25165I to III 2. Die Adapter, machine groups E & G 25168II to III 3. Die Adapter, machine groups E & G 25167II to III 4. Stripper Adapter, machine group G 25155

I Shim Pack for size I Dies * 25181

II Shim Pack for size II Dies * 25182

* Includes 1 each of .5 and .3 shims and 2 each of .1mm thick shims

11

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

M6 Set ScrewCat. No. 25213

M 14 Set Screw Cat. No. 25212

TRUMPF ALIGNMENT COLLARS, PUNCH CHUCKS

ALIGNMENT COLLARS

SIZE DESCRIPTION CAT. NO.

I 1. Auto-tool change machine groups E/F/G/H/I 25018II to III 2. Auto-tool change machine groups E/F/G/H/I 25139

I 3. Manual tool change machine groups A/B/C/D 25197II to III 4. Manual tool change machine groups A/B/C/D 25198I to II 5. For heavy duty punch 25138

I 6. For machine group S 25186II to III 7. For machine group S 25188

PUNCH CHUCKS

SIZE DESCRIPTION CAT. NO.

0 .000 - .236” [0 - 6.00 mm] 250100 .237 - .413” [6.01 - 10.5 mm] 25021

Not recommended for punching stainless steel

1

2

3

4

5

6

7

b.Locating KeyCat. No. 25019

a.Screw (M3 x 12)Cat. No. 25215

c.Adjustment Bolt (M6 x 35mm)Cat. No. 970453

Screw (M3 x 12)Cat. No. 25215

Locating KeyCat. No. 25209

b

c

a

a

b

c

12

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

DIE SHIMS .010 Thick [0.25mm]

STATIONINDIVIDUAL PACKAGED

QTY. CAT. NO. QTY. CAT. NO.1/2” [A] 1 2101 25 22081-1/4” [B] 1 2097 25 22092” [C] 1 2089 10 22103-1/2” [D] 1 2081 5 22114-1/2” [E] 1 2073 5 22126” [F]

1 24269min 10 W200

6” [F] min 100 W200

THICK DIE & PUNCH SHIMS, SLUG EJECTORS

DIE SHIMS .030 Thick [0.75mm]

STATIONINDIVIDUAL PACKAGED

QTY. CAT. NO. QTY. CAT. NO.1/2” [A] 1 2721 25 27221-1/4” [B] 1 2723 25 27242” [C] 1 2725 10 27263-1/2” [D] 1 2727 5 27284-1/2” [E] 1 2729 5 27306” [F]

1 24270min 10 W200

6” [F] min 100 W200

DIE SHIMS .060 Thick [1.5mm]

STATIONINDIVIDUAL PACKAGED

QTY. CAT. NO. QTY. CAT. NO.1/2” [A] 1 2104 25 2172

1-1/4” [B] 1 2100 25 21732” [C] 1 2092 10 21743-1/2” [D] 1 2084 5 21754-1/2” [E] 1 2076 5 21766” [F]

1 24271min 10 W200

6” [F] min 100 W200

DIE SHIMS FOR MULTI-TOOLS®

MACHINE TYPE STATION SHAPE THICKNESSINDIVIDUAL PACKAGE OF 15

CAT. NO. CAT. NO.FINN-POWER® 3-1/2 - 8i/Ri .010” [0.25mm] 6800 6815

FINN-POWER® 3-1/2 - 8i/Ri .030” [0.76mm] 6801 6816

FINN-POWER® MT 12 & 20-8 Round .010” [0.25mm] 6802 6817

FINN-POWER® MT 12 & 20-8 Round .030” [0.76mm] 6803 6818

FINN-POWER® MT 12 & 20-8 Shape .010” [0.25mm] 6804 6819

FINN-POWER® MT 12 & 20-8 Shape .030” [0.76mm] 6805 6820

FINN-POWER® MT 6 & 10 - 16 .010” [0.25mm] 6806 6821

FINN-POWER® MT 6 & 10 - 16 .030” [0.76mm] 6807 6822

FINN-POWER® MT 6 & 8-24 .010” [0.25mm] 6808 6823

FINN-POWER® MT 6 & 8-24 .030” [0.76mm] 6809 6824

Thick Turret 1-1/4 - 5 .010” [0.25mm] 6810 6825

Thick Turret 1-1/4 - 5 .030” [0.76mm] 6811 6826

SLUG EJECTORS Square Urethane

Hole Diameter in Punch QTY. CAT. NO.

1/8” (3.2mm) 50 61163/16” (4.8mm) 50 61173/8” (9.5mm) 50 61181/2” (12.7mm) 50 6119Assortment 50 6410

THIN TURRET DIE SHIMS, ACCESSORIES, SLUG EJECTORS

PUNCH SHIMS .060 Thick [1.5mm]

STATIONINDIVIDUAL SHIM PACKAGED SHIMSQTY. CAT. NO. QTY. CAT. NO.

1/2” [A] 1 1898 25 21671-1/4” [B] 1 1899 25 21681-1/4” [B] Metric 1 152 25 982” [C] 1 2096 10 21693-1/2” [D] 1 2088 5 21704-1/2” [E] 1 2080 5 2171

13

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

THICK DIE & PUNCH SHIMS, SLUG EJECTORS

DIE SHIMS .010 Thick [0.25mm]

STATIONINDIVIDUAL PACKAGED

QTY. CAT. NO. QTY. CAT. NO.1-1/4” [B] 1 2097 25 22093-1/2” [D] 1 2081 5 2211

THIN TURRET DIE SHIMS, ACCESSORIES, SLUG EJECTORS

DIE SHIMS .030 Thick [0.75mm]

STATIONINDIVIDUAL PACKAGED

QTY. CAT. NO. QTY. CAT. NO.1-1/4” [B] 1 2723 25 27243-1/2” [D] 1 2727 5 2728

DIE SHIMS .060 Thick [1.5mm]

STATIONINDIVIDUAL PACKAGED

QTY. CAT. NO. QTY. CAT. NO.1-1/4” [B] 1 2100 25 21733-1/2” [D] 1 2084 5 2175

PUNCH SHIMS .060 Thick [1.5mm]

STATIONINDIVIDUAL SHIMS PACKAGED SHIMS

QTY. CAT. NO. QTY. CAT. NO.

1/2” [A] 1 100 25 99

1-1/4” [B] 1 152 25 98

SLUG EJECTORS Square Urethane

Hole Diameter in Punch QTY. CAT. NO.

1/8” (3.2mm) 50 61163/16” (4.8mm) 50 61173/8” (9.5mm) 50 61181/2” (12.7mm) 50 6119Assortment 50 6410

14

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

NOTE: Maximum material thickness for above adapters -.135" (3.4 mm) mild steel and aluminum, .090" (2.3 mm) stainless steel.

Other style adapters are available - please consult our sales desk.

ADAPTERS

THICK TURRET 1-1/4” [B] to 1/2” [A] STATION ADAPTER

DESCRIPTION CAT. NO.

Punch & Guide Assembly Adapter (Keyed at 0˚ & 180˚) 2284

Die Adapter 2220

Screw 2119

THICK TURRET 2” [C] to 1-1/4” [B] STATION ADAPTER

DESCRIPTION CAT. NO.

Punch & Guide Assembly Adapter 2476

Die Adapter 2475

Screw 6206

THICK TURRET 3-1/2” [D] to 1-1/4” [B] STATION ADAPTER

DESCRIPTION CAT. NO.

Punch & Guide Assembly Adapter (not shown) 2492

Die Adapter 35058

THICK TURRET 4-1/2” [E] to 1-1/4” [B] STATION ADAPTER

DESCRIPTION CAT. NO.

Punch & Guide Assembly Adapter (not shown) 2680

Die Adapter 2681

THIN TURRET 3-1/2” [D] to accept 1-1/4” [B] STATION Tooling

DESCRIPTION CAT. NO.

Fab Station Punch Assembly 10059

Die Adapter* 10096

* Keyed 4 ways for use in all machines.

15

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

FAB 7/8” [22.2MM] SQUARE SHEARPROOF

DESCRIPTION CAT. NO.

Punch and Guide Assembly 223

Punch only 228

Adjustable Punch Head 145

Spring 125

Guide Collar w/”O” Ring 146

Guide [Slip Fit Shaped] 231

Die [Positive] 162

Die [Slug Hugger® 2] 10373

Punch Shims 152

TURRET BUSHINGS

STATION MACHINE MODEL(S) KEYING CAT. NO.

1-1/4” [2.437”/61.9mm flange O.D.]

For use in any SAF that utilizes Strippit®1-1/4” Tool Holder Assembly

#62532-000 or #62515-000, as well as thefollowing: T-SAF-30, FC75/30, FC750,FC1000 (l & ll), FC1250 and Cap 1000

0˚ - 90˚ (Standard)0˚ - 90˚ - 180˚ & 270˚0˚ - 45˚ - 180˚ & 315˚0˚ - 135˚ - 225˚ & 270˚

15490491492

1-1/4”(2.375”/ 60.3 mm flange O. D.)

FC1000 lll & 33 STN. 1250, FC1000R

0˚ - 90˚ (Standard)0˚ - 90˚ - 180˚ & 270˚0˚ - 45˚ - 180˚ & 315˚0˚ - 135˚ - 225˚ & 270˚

Multiple Keyways

471

3-1/2” FM-30-30 1-Keyway 280

3-1/2”

For use in any SAF that utilizes Strippit®3-1/2” Tool Holder Assembly

#62530-000 or #93023-100, 200, as wellas the following: T-SAF-30, FC75/30, FC750,

FC1000 (l, ll & III), FC1250 andCap 1000, all XT & “S” Series machines.

1-Keyway 277

FAB SQUARE SHEARPROOF, TURRET BUSHINGS

16

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

* These items are identical to Wilson Tool Grinder.

GRINDERS

This fully enclosed punch and die grinder includes an integral mist collection unit and provides full containment of the grinding area vs. the standard open air containment shrouding.

• 5 hp spindle motor with CBN grinding wheel.

• Dual coolant application. Coolant is supplied both externally and through the spindle for maximum heat removal while grinding.

• Regrind punches up to 10° angle. • Simple fixturing design. Allows for quick, easy loading and unloading of parts • Heavy-duty three-jaw chuck standard with auxiliary magnetic chuck. • Small footprint. At 40" x 48" (101 x 122 cm)

WILSON PUNCH & DIE GRINDER

DESCRIPTION CAT. NO.

230 V 3 Phase 30 Amp grinder 6854

230 V 3 Phase 30 Amp Grinder - Enclosed 6938

460 V 3 Phase 20 Amp Grinder 6855

460 V 3 Phase 20 Amp Grinder - Enclosed 6939

1/2 Gallon Coolant Mix 6856

5 Gallong Coolant Mix 6857

Coolant Filter Pack [50 Sheets] 6858

6” Replacement CBN Wheel 6859

Production Coolant Filtration System 6860

Replacement Filter Roll for Filtration System 6861

Magnetic Chuck with Mounting Ring 6998

WILSON PUNCH & DIE MINI GRINDER

DESCRIPTION CAT. NO.

DCM Mini PDG Grinder 6950

1/2 Gallon Coolant Mix 6856

5 Gallong Coolant Mix 6857

Coolant Filter Pack [50 Sheets] 6858

6” Replacement CBN Wheel 6859

DCM Mini shear Grind Sine Plate 6951

Magnetic Chuck 6952

17

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

SHEAR GRINDING FIXTURE

• Easy to adjust angle setting for shear grinding.• Can be used with your existing surface grinder.• Easy to use instruction sheet with grinding tips.

GRINDING FIXTURE & COMPONENTS

TRUMPF GRINDING FIXTURE & COMPONENTS

DESCRIPTION CAT. NO.

Grinding Fixture [includes instructions] 6034

Size 1 & 2 Punch Holder 6089

Size 1 Die Holder 25365

Size 2 Die Holder 25366

MT4 Punch Holder 25302

MT4 Die Holder 25304

MT6 Punch Holder 25303

MT6 Die Holder 25305

MT5 Punch Holder 25935

MT5 Die Holder 25936

MT10 Punch Holder 26004

MT10 Die Holder 26021

STD & HP GRINDING FIXTURE & COMPONENTS

DESCRIPTION CAT. NO.

Shear Grinding Fixture 6034

EXP Sharpening Adapter 6990

1/2” Tooling Sleeve Adapter 6043

1-1/4” Tooling Punch and Die Holder 6042

1-1/4” to 1/2’ Die Adapter 6088

‘Old Style’ 2”, 3-1/2” & 4-1/2” Tooling Punch Holder -for Standard Thick 6039

HP Thick 2”, 3-1/2” & 4-1/2” Tooling Punch Holder 6040

Dura-Blade Grinding Fixture 6932

Pointer [Replacement] 6035

Degree Scale [Replacement] 6036

STD & HP MULTI-TOOL© PUNCH & DIE HOLDERS

DESCRIPTION CAT. NO.

8 Station Thick/Thin Punch & Die Holder 6812

8mm Punch & Die Holder 6156

16mm Punch & Die Holder 6157

24mm Punch & Die Holder 6158

18

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

12

345

6 7 89

10

11

12

1314

151617

1819

20

21

4041464742

45 27 43

32

20313029

23

24

25

28 27 26

12

345

6 7 89

10

11

12

1314

151617

1819

20

21

4041464742

45 27 43

32

20313029

23

24

25

28 27 26

WORK STOPPER ASSEMBLIES

19

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

WORK STOPPER ASSEMBLIES

PRESS BRAKE WORK STOPPER ASSEMBLIES

Drawing # Wilson Tool Part #

Amada Part #

Description

1-47 WXA8845A 4128816d Work Stopper Assembly-Flip upN/A WXA8820A 3003502 Remote Foot Pedal

1 WXA8846yy NB-6 Feedscrew-Bearing2 WXA0809 KR x 20 Clamp Lever 6MM3 WXA8846zz1 4128801a Collar4 WXA8846gg 4128798a Bearing Retainer5 WXA8835A 4128802 Handwheel With Handle6 WXA0834a M6 x 25 Screw-Socket Cap M6 X 25 Pkg of 107 WXA8846ff 4128799 Bearing Case8 WXA0810 KR x 40 Clamp Lever 8MM9 WXA8846aa 4128797d Body

10 WXA8846hh 7950004 Guide Rod11 WXA8846mm 4128809 Cap12 WXA9228a S-28 O-Ring S-2813 WXA8846nn 41128808a Piston14 WXA9226 1BP-21 O-Ring P-2115 WXA8846oo 4128807c Piston16 WXA9221 1BP-14 O-Ring P-1417 WXA8846pp LM13UU Linear Bearing18 WXA9209 1BP-10 O-Ring P-1019 WXA8846bb 4128810c Holder20 WXA8846xx M6 Type 3 Hex Nut21 WXA8841 4128800a Feedscrew23 WXA8846ll 4128805 Collar24 WXA8846kk 4128803 Lock Nut25 WXA8846jj 4128804a Lock Bar26 WXA0831c M6 x 10 Screw M6 X 10 Pkg of 1027 WXA8846ii 4129243 Hinge Pin28 WXA8827 4128812 Finger Stop Pad29 WXA0839c M6 x 10 Screw-Socket Cap M6 x 10 Pkg of 1030 WXA8846dd 4129911b Main Flip Arm31 WXA0831d M6 x 16 Screw M6 X 16 Pkg of 1032 WXA8846ww 1/8” Plug40 WXA4087 7950002a Cylinder-Flip Up Actuator42 WXA8846rr 6 x 36 Dowel Pin43 WXA8846ee 4128819b Flip up Lever45 WXA8846ss STW-8 Snap Ring 8M46 WXA8846qq LM6UU Feed Screw Bearing47 WXA8846zz 4128818 Feedscrew-Linear Bearing Shaft

N/A WXA8846cc 4128806a CylinderN/A WXA8846vv N/A Male ConnectorN/A WXA8846tt STW-6 Snap Ring 6MN/A WXA0831b M6 x 8 Screw M6 X 8 Pkg of 10N/A WXA0831e M4 x 6 Screw M4 X .7 x 6 Pkg of 10N/A WXA3583 N/A Die Holder 3 1/2”N/A WXA3584 N/A Die Holder 4 1/2”N/A WXA3580 N/A Die Holder 1/2”N/A WXA3581 N/A Die Holder 11/4” Center (old style)

20

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

* 1/8" and 3/16" dowels are not tapped / vented

971450971949971449 971451

CAT. No. Socket Head Cap Screw

Pull DowelsBall Dia. Ball Release

ScrewTru-Fasten

SpringOptional Stiff

Spring

Inner Booster SpringVented Tapped

ILRT 025 66185/16-18 x 1-1/2

971 3841/8 x 3/4*

971 3861/4 x 3/4

971 3931/4

971 4288-32 x 1 971 397 N/A 972 100

ILRT 037 66185/16-18 x 1-1/2

971 3853/16 x 3/4*

971 3861/4 x 3/4

971 3931/4

971 4288-32 x 1 971 397 N/A 972 100

ILRT 050 63913/8-16 x 1-1/2

971 3861/4 x 3/4”

971 3945/16

971 4288-32 x 1 971 398 N/A 972 101

ILRT 062 63913/8-16 x 1-1/2

971 3861/4 x 3/4”

971 3945/16

971 4288-32 x 1 971 398 N/A 972 101

ILRT 075 63913/8-16 x 1-1/2

971 3861/4 x 3/4”

971 3953/8

971 4288-32 x 1 971 399 N/A 972 101

ILRT 087 63913/8-16 x 1-1/2

971 3861/4 x 3/4”

971 3953/8

971 4288-32 x 1 971 399 N/A 972 101

ILRT 100 971 3911/2-13 x 1-3/4

971 3861/4 x 3/4”

971 3953/8

971 4288-32 x 1 971 399 N/A 972 101

ILRT 125 971 3911/2-13 x 1-3/4

971 3861/4 x 3/4”

971 3953/8

971 4288-32 x 1 971 399 N/A 972 101

CAT. No. Socket Head Cap Screw

Pull DowelsBall Dia. Ball Release

ScrewTru-Fasten

SpringOptional Stiff

Spring

Inner Booster SpringVented Tapped

IHRT 037 971 3885/16-18 x 1-3/4

971 3853/16 x 3/4*

971 3861/4 x 3/4

971 3953/8

971 4288-32 x 1 971 400 971 402 971 404

IHRT 050 81663/8-16 x 2

971 3861/4 x 3/4”

971 3961/2

971 4288-32 x 1 971 401 971 403 971 405

IHRT 062 81663/8-16 x 2

971 3861/4 x 3/4”

971 3961/2

971 4288-32 x 1 971 401 971 403 971 405

IHRT 075 81663/8-16 x 2

971 3861/4 x 3/4”

971 3961/2

971 4288-32 x 1 971 401 971 403 971 405

IHRT 087 81663/8-16 x 2

971 3861/4 x 3/4”

971 3961/2

971 4288-32 x 1 971 401 971 403 971 405

IHRT 100 63251/2-13 x 2

971 3861/4 x 3/4”

971 3961/2

971 4288-32 x 1 971 401 971 403 971 405

IHRT 125 63251/2-13 x 2

971 3861/4 x 3/4”

971 3961/2

971 4288-32 x 1 971 401 971 403 971 405

RETAINER ACCESSORIES

21

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

SPRINGS FOR BACKING PLATE STYLE RETAINERS

RETAINER ACCESSORIES

CAT. No. BACKING PLUGS

JACK SCREW

For manual mounting, prevents chips from enter-ing spring.ball hole. RETAINER

NUTSIN LINE DOWEL DIE BUTTON SOLID DRILL BUSHING

REAM BUSHING

ILRT 025 971 408.125 hole N/A 971 422

solid971 429

5/16-18 X 1-1/4 971 432 971 433 971 438

ILRT 037 971 409.1875 hole N/A 971 423

solid971 429

5/16-18 X 1-1/4 971 433 971 444 971 438

ILRT 050 971 410.250 hole

971 416.312 hole

971 424solid

971 4295/16-18 X 1-1/4 971 434 971 445 971 439

ILRT 062 971 411.250 hole

971 417.406 hole

971 425solid

971 4295/16-18 X 1-1/4 971 435 971 446 971 439

ILRT 075 971 412.250 hole

971 418.531 hole

971 426solid

971 4295/16-18 X 1-1/4 971 436 971 447 971 439

ILRT 087 971 413.250 hole

971 419.625 hole

971 427solid

971 4295/16-18 X 1-1/4 971 437 971 448 971 439

ILRT 100 971 406.250 hole

971 414.719 hole

971 420solid

971 4295/16-18 X 1-1/4 971 430 971 441 971 440

ILRT 125 971 407.250 hole

971 415.812 hole

971 421solid

971 4295/16-18 X 1-1/4 971 431 971 442 971 440

TYPEA

TYPEB

TYPEC

CAT. No. BACKING PLUGS

JACK SCREW

For manual mounting, prevents chips from enter-ing spring.ball hole. RETAINER

NUTSIN LINE DOWEL DIE BUTTON SOLID DRILL BUSHING

REAM BUSHING

IHRT 037 971 409.1875 hole N/A 971 423

solid971 429

5/16-18 X 1-1/4 971 433 971 444 971 438

IHRT 050 971 410.250 hole N/A 971 424

solid971 429

5/16-18 X 1-1/4 971 434 971 445 971 439

IHRT 062 971 411.250 hole N/A 971 425

solid 971 429

5/16-18 X 1-1/4 971 435 971 446 971 439

IHRT 075 971 412.250 hole N/A 971 426

solid971 429

5/16-18 X 1-1/4 971 436 971 447 971 439

IHRT 087 971 413.250 hole N/A 971 427

solid971 429

5/16-18 X 1-1/4 971 437 971 448 971 439

IHRT 100 971 406.250 hole N/A 971 420

solid971 429

5/16-18 X 1-1/4 971 430 971 441 971 440

IHRT 125 971 407.250 hole N/A 971 421

solid971 429

5/16-18 X 1-1/4 971 431 971 442 971 440

250 S1/4 SPRING

971 380

500 S1/2 SPRING

971 383

375 S3/8 SPRING

971 382

312 S5/16 SPRING

971 381

EASY SHARP TOOL

CAT. No. SIZE FITS PIN NO.

971481 .061 4,6,9 & 12

971482 .031 2,3

971562 Set

22

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

URETHANE

“Zip-Mar” Adhesive Disks™

Station QTY. CAT. NO.

1/2” [A] Pkg. of 10 6083

1-1/4” [B] Pkg. of 10 6084

2” [C] Pkg. of 10 6085

3-1/2” [D] Pkg. of 10 6086

4-1/2” [E] Pkg. of 10 6087

6” x 12” Sheet(15.2 x 30.5 cm) 1 6108

Zip Mar™ reduces the costly marring of material by the stripper. The disk is applied to the bottom of a standard stripping guide or stripper plate. A hole is then cut with a sharp knife to reveal the existing hole in the stripper.

Note: Urethane dies are also available for mark-free bending. Contact application sales desk for pricing and availability.

URETHANE 100’ ROLLS

Station CAT. NO.

.015” x 6” [0.4 x 152mm] 42530

.030” x 6” [0.8 x 152mm] 42531

.022” x 6” [.56 x 152mm] 42532

I. D.

L

VENT

O. D.

.25

Wilson Tool offers a wide range of Urethane products for all of your stamping needs.

In addition to the standard thicknesses and widths of sheets, bars, rods and strippers, custom Urethane is available upon request.

23

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

TOOL MAINTENANCE AND LUBRICANTS

Thick/Thin Turret Nylon Vice Jaws

CAT. NO. 24001

Thick Turret Assembly Fixture

C&D StationsCAT. NO. 24162

Spring Disassembly ToolCAT. NO. 8104

Rubberized abrasive wheelfor removing galling

CAT. NO. 8050

Sheet LubricantXcel 1 Liter Spray Bottle

CAT. NO. 24315

Xcel 5 Liter ConcentrateCAT. NO. 24316

Cut-Max 570 Sample BottleCAT. NO. 6941

Punch LubricantCAT. NO. 6055

Sure Shot Sprayer1-QT (.95 liter) capacity

CAT. NO. 6120

24

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

972669 STANDARD CONFIGURATION:

• 3 Drawers 100 mm deep (12 compartments each)• 4 Drawers 150 mm deep (open layout)• Able to hold cartridges

971092 8-DRAWER CONFIGURATION:

• 7 Drawers with 12 6 x 8" (152 x 203mm) compartments and 3-1/8" (79mm) depth (usable height).

• 1 Drawer with 16 6 x 6" (152 x 152mm) compartments and 7-1/16" (179mm) depth (usable height).

• Cabinet includes: ribbed rubber mat and lock with two keys.

Dimensions: 42" (107cm) high x 28" (71cm) wide x 29" (74cm) deep.• Tool cabinets are shipped Motor Freight-collect.

Note: Actual color and drawer arrangement will vary slightly from photo.

FOR TRUMPF STYLE TOOLING

Description CAT. NO.

Trumpf Cartridge Cabinet 972669

Standard Trumpf Tooling Cabinet 971092

OPTIONS

Plastic Drawer Liners 90002

Mobile Base 90003

Maple Top 90004

Cart Handle (1) 90005

Ribbed Rubber Mat 90006

TOOL STORAGE - PUNCHING

25

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

90001 8 Drawer Arrangement & Capacity Consisting of:3 drawers for 1/2" (A) station tooling: • 18 punch & guide assemblies (per drawer) • 36 dies & 18 additional punches (per drawer)

3 drawers for 1-1/4" (B) station tooling: • 12 punch & guide assemblies (per drawer) • 24 dies & 12 additional punches (per drawer)

1 drawer for 2" (C) station and 3-1/2" (D) station tooling: • 12 2" or 3-1/2" station punches, stripper plates and dies

1 drawer (9 compartments) for 4-1/2" (E) station tooling, • 6" (F) station tooling, large station guide assemblies and misc.

Cabinet includes lock with two keys and forklift base.

Dimensions: 42" (107 cm) high x 28" (71 cm) wide x 29" (74 cm) deep.Tool cabinets are shipped motor freight-collect

Standard color: Classic Blue

TOOL STORAGE - PUNCHING

FOR THICK TURRET TOOLING

Description CAT. NO.

Thick Turret Tooling Cabinet 90001

Thin Turret Tooling Cabinet 974198

CABINET OPTIONS [FOR ALL CABINETS]

Plastic Drawer Liners (1) 90002

Mobile Base 90003

Maple Top 90004

Cart Handle (1) 90005

Ribbed Rubber Mat 90006

974198 9 Drawer Arrangement & Capacity consisting of:6 Drawers for 1-1/4" Station Tooling: • 18 Punch & Guide Assemblies (per drawer) • 36 Dies & 18 Replacement Punches (per drawer)

2 Drawers for 3-1/2" Station Tooling: • 16 Sets of 3-1/2" Station Tooling (per drawer)

1 Drawer (9 Compartments) for Guide Assemblies, 5" Station Tooling or Miscellaneous Fabricating Tooling.

Cabinet includes lock with two keys and forklift base.

Dimensions: 42" (107 cm) high x 28" (71 cm) wide x 29" (74 cm) deep.Tool Cabinets are shipped Motor Freight-collect.

Standard Color: Classic Blue

FOR THIN TURRET TOOLING

Note: Actual color and drawer arrangement will vary slightly from photo.

26

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Cabinet Features for 90020, 900021• Solid steel construction• Mobile base with heavy duty casters. Extended leg base to prevent tipping when fully loaded. Rated capacity of 3600 pounds• Integrated Lock-In mechanism is easily activated with one hand• Safety interlock to prevent opening of more than one drawer at a time• Drawers lined with 1/8” thick industrial strength rubber mat• Full width handles with end caps• Clear protective drawer label covers• Retainer top with rubber mat • Ships via truck freight collect

• Weight capacity of 400 lbs. per drawer

90007 Cabinet Features:• Mobile base with heavy duty casters with a rated capacity of 3600

pounds• Dies are separated by custom U-channels to prevent damage to V-openings• Individual latches on all drawers• Full width handles with end caps and paper labeling strips with clear protective label covers

90020 Cabinet Features:• Punches held upright in custom steel U-channels to prevent damage to tips and mounting tongues• Dies are separated by custom U-channels to prevent damage to V-openings• (12) Punch channels for button style tooling• (4) Punch channels for solid tang tooling

• Additional separators available - inquire at time of order

90021 Cabinet Features:• Lay-down storage allowing visibility of laser marking for easy tool identification

91007 Tip-up Punch Cabinet for European Style Press Brake Tooling Features:• Integrated locking easily activated with one hand• Handle and base extensions for casters

Individual latches on all drawers are easily activated with one hand.

Extended wheel base prevents the cabinet from tipping.

90020

90007

CAT. No. Lead Time (Days)

Height inches

Width inches

Depth inches

Drawers Included

2" (50mm)

3" (76mm)

4" (101mm)

7" (175mm)

90007 20 42 40.25 22.5 2 N/A 3 N/A

90020 5-15 48 48.0 24.0 2 1 N/A 3

90021 5-15 51.5 48.0 27.0 2 6 2 N/A

91007 5-15 45.5 42 24 N/A 2 1 2Additional tooling cabinets available. Contact application sales desk for pricing and lead times.

TOOL STORAGE - PRESS BRAKE

CUSTOM COLOR OPTIONS• Allow 15 days lead time for custom colors

055 Avalanche Blue

051 Everest Blue

052 Classic Blue

057 Midnight Blue

102 Boreal Green

091 Black

041 Beige

061 Frost White

071 Light Gray

072 Charcoal Gray

208 Yellow

085 Sienna Orange

081 Flame Red

616 White

*Colors may differ slightly from those illustrated.

27

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

Tel: 800.328.9646Tel: 800.445.4518Tel: 800.944.4671Tel: 800.268.5573Tel: 001.800.741.2510

[email protected]@[email protected]@[email protected]

[email protected]@[email protected]@[email protected]

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

U.S.A. PunchingU.S.A. Press BrakeU.S.A. ImpaxCanadaMexico

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

Fax: 800.222.0002Fax: 800.539.4590Fax: 800.944.4679Fax: 800-668-9314Fax: 001.800.544.2096

NOTES

WILSON TOOL INTERNATIONAL

WORLD HEADQUARTERS

Wilson Tool International - United StatesTel (Free): 800-328-9646 | Tel: 651-286-6001 Fax (Free): 800-222-0002 | Fax: 651-286-5959 Email: [email protected]

NORTH AMERICA

Wilson Tool - CanadaPunching and Stamping Division Tel: 800-268-5573 | Fax: 800-668-9314 Email: [email protected]

Wilson Tool - CanadaPress Brake Division Tel: 800-268-4180 | Fax: 905-840-1032 Email: [email protected]

Wilson Tool - MexicoTel: 52 (81) 8865-4820 | Fax: 52 (81) 8865-4599 Email: [email protected]

SOUTH AMERICA

Wilson Tool - ArgentinaTel: +54 114 7996519 Email: [email protected]

Milling Ferramentas - BrazilTel/Fax: 55 11 5621-2100 Email: [email protected]

CHINA / PACIFIC RIM

Wilson Tool - ChinaTel: +86 21 51089638 | Fax: +86 21 64422195 Email: [email protected]

EUROPE / MIDEAST / AFRICA

Wilson Tool - United KingdomTel (Free): 0800-373748 | Tel: +44 1793 831818 Fax (Free): 0800-373758 | Fax: +44 1793 831945 or 46 Email: [email protected]

Wilson Tool - GermanyTel (Free): 00800-9457668665 | Tel: +49 5723 747 0 Fax (Free): 00800-945766329 | Fax: +49 5723 747 10 Email: [email protected]

Wilson Tool - DenmarkTel (Free): 80 20 20 24 | Tel: +45 44 53 1699 Fax (Free): 80 20 20 26 | Fax: +45 44 53 0607 Email: [email protected]

Wilson Tool - FranceTel: +33 (0) 164 13 47 80 | Fax: +33 (0) 164 13 47 81 Email: [email protected]

Wilson Tool - South Africa Tel: +27 11 849 1955 | Fax: 086 657 8629 Email: [email protected]

Toolspress - ItalyTel: +39 0521 850510 / 850677 Fax: +39 0521 850796 Email: [email protected]

A514C 2015

© 2015 Wilson Tool International


Recommended